Arbor Straight Shaft Spindle 3/4” Dia. Shank 19/32”dia. AOL 7” (23N165). Hablamos español.
Item Tag: MOTOR GRINDER
PTD HS USA Straight Shaft Spindle 23/32” Dia. x6” AOL (24M195). Hablamos español.
ARBOR – SPINDLE 1/2″ STRAIGHT SHAFT FOR 1/2″ SHAFT MOTOR – HOLDER FOR 1/2″ ARBOR HOLE- RIGHT HAND THREAD – 3-7/16″ LONG- Arbor – Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used. This Arbor – Spindle is used to hold Wheels with 1/2″ arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more. Spindle has a 1/2″ arbor hole to work on 1/2″ shaft Grinders, Motors or Polishers. The arbor is made to be used on the Right Side of the motor, fastened and held on the motor shaft with 2 Allen Head Set Screws. Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight. FEATURES: · Precision Quality · Machining is done by CNC Equipment · Made of Steel and Anodized Black Finish · Set of Allen Screw do not protrude above the main shaft of the spindle. · Spindle comes with 2 Steel Machined Washers · Right Hand 1/2″ x 20 Nut · Quality Hardware (Washers and Screws) SPECIFICATIONS: JETS Product # 1603-923475- Material: Cold Rolled Steel – Overall Length: 3-7/16″ – 87.3mm – Arbor Body Diameter: 7/8″ – 22.3mm – Spindle Body Length: 1-9/16″ – 39.7mm – Spindle Shaft Length: 1-7/8″ – 47.65mm – Arbor Hole: 1/2″ – 12.7mm for Shaft Connection – Spindle Shaft Diameter: 1/2″ – 12.7mm – Weight: 6.8oz. – 191.5gr Spindle is made to be used on a 1/2″ shaft diameter and on the Right Hand Side of Motor with forward direction. SHIPPING: Via USPS FIRST CLASS MAIL NOTE: Visit JETSINC ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more Jewelers Equipment Tools and Supplies. JETS Inc. B8 412 3X-FRE 1.1Lz 4X-FRE 1.10Lz 412 CKSP Z M
SPINDLE STRAIGHT SHAFT SHAFT RIGHT HAND THREADWITH 1/2″ ARBOR HOLE – 1/2″ THREADED SHAFT for Right Hand Holds 1″ Wide Wheels 4-3/4″ Long A custom made Special Design spindle with excellent finish is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used. Spindle is designed to hold 1″ wide wheels. This Arbor – Spindle is used to hold Wheels with 1/2″ arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more. Spindle has a 1/2″ arbor hole to work on 1/2″ shaft Motors, Grinders or Polishers. The arbor is made to be used on the Right Side of the motor, fastened and held on the motor shaft with 2 Allen Head Set Screws. Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight. FEATURES: · Precision Quality · Machining is done by CNC Equipment · Made of 1-1/8″ Diameter Solid Steel · Set of Allen Screw do not protrude above the main shaft of the spindle. · Right Hand 1/2″ x 20 Nut · High Quality Finish SPECIFICATIONS: JETS Product # 1603-123475- Material: Cold Rolled Steel – Overall Length: 4-3/4″ – 120mm – Body Diameter: 1-1/8″ – 28.5mm (Widest Portion) – Spindle Body Length: 3″ – 76mm – Spindle Shaft Length: 1-3/4″ – 44.4mm – Arbor Hole: 1/2″ (For Motor Shaft Connection) – Spindle Shaft Diameter: 1/2″ – 12.7mm – Weight: 14.8oz. – 420gr Spindle is made to be used on a 1/2″ shaft diameter and on the Right Hand Side of Motor with forward direction. NOTE: Visit JETSTOOLS ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more Jewelers Equipment Tools and Supplies. JETS Inc. B16 818 CKSP M
SPINDLE STRAIGHT SHAFT SHAFT RIGHT HAND THREADWITH 5/8″ ARBOR HOLE 1/2″ THREADED SHAFT for Right Hand Holds 1″ Wide Wheels 5-3/4″ Long A custom made Special Design spindle with excellent finish is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used. Spindle is designed to hold 1″ wide wheels. This Arbor – Spindle is used to hold Wheels with 1/2″ arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more. Spindle has a 5/8″ arbor hole to work on 5/8″ shaft Motors, Grinders or Polishers. The arbor is made to be used on the Right Side of the motor, fastened and held on the motor shaft with 2 Allen Head Set Screws. Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight. FEATURES: · Precision Quality · Machining is done by CNC Equipment · Made of 1-1/4″ Diameter Solid Steel · Set of Allen Screw do not protrude above the main shaft of the spindle. · Set of 2 Machined Steel Washers · Right Hand 1/2″ x 20 Nut · High Quality Finish SPECIFICATIONS: JETS Product # 1603-124575- Material: Cold Rolled Steel – Overall Length: 5-3/4″ – 145mm – Body Diameter: 1-1/4″ – 31.8mm (Knurled Portion) – Spindle Body Length: 4″ – 102..mm – Spindle Shaft Length: 1-3/4″ – 44.4mm – Arbor Hole: 1/2″ (For Motor Shaft Connection) – Spindle Shaft Diameter: 1/2″ – 12.7mm – Weight: 14.5oz. – 409gr Spindle is made to be used on a 5/8″ shaft diameter and on the Right Hand Side of Motor with forward direction. NOTE: Visit JETSTOOLS ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more Jewelers Equipment Tools and Supplies. JETS Inc. 220 15.9 CKSP M
TAPERED SPINDLE FOR 1/4″ ARBOR SHAFTUSE ON 1/4″ SHAFT – GRINDER – BUFFER OR MOTOR RIGHT HAND THREAD – 4-5/16″ LONG Tapered Threaded Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used. This Arbor – Spindle is used to hold Wheels with 1/8″ Pin Hole Centers: Polishing Buffs and Felt Wheels, Satin Finish wheels, Wood Hub Brushes… NOTE: DO NOT USE Tapered Spindles to hold Grinding Stone Wheels or Hard Heavy Wheel – IT IS EXTREAMLY DANGEROUS TO DO SO! Spindle has a 1/4″ arbor hole to work on 1/4″ shaft Grinders, Motors or Polishers. The arbor is made and threaded to be used on the RIGHT Side of the motor. Spindle has a pair of Allen Head Set Screws to attach to your motor shaft. Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight. JETS Product # 1603-191414 FEATURES: · Precision Quality · Machining is done by CNC Equipment · Made of Steel and Anodized Finish · Allen Set Screws do not protrude above the main shaft of the spindle. SPECIFICATIONS: – Material: Cold Rolled Steel – Overall Length: 3-5/8″ – 92mm – Arbor Body Diameter: 5/8″ – 15.9mm – Spindle Body Length: 2-1/4″ – 57.2mm – Spindle Shaft Depth: 55/64″ – 21.75mm – Arbor Hole: 1/4″ – 6.3mm for Shaft Connection – Weight: 2.3oz. – 66grm Spindle is made to be used on a 1/4″ shaft diameter and on the Right Hand Side of Motor with forward direction. NOTE: DO NOT USE Tapered Spindles to hold Grinding Stone Wheels or Hard Heavy Wheel – IT IS EXTREAMLY DANGEROUS TO DO SO! SHIPPING: Via USPS FIRST CLASS MAIL NOTE: Visit JETSTOOLS ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more Jewelers Equipment Tools and Supplies. JETSINC. 912 E3 CKP Z M
Spindle has a 1/2″ ID arbor hole to work on 1/2″ shaft Grinders, Motors or Polishers. The arbor is made and threaded to be used on the LEFT HAND Side of the motor. Spindle has a pair of Allen Head Set Screws to attach to your motor shaft.
TAPERED SPINDLE FOR 1/4″ ARBOR SHAFTUSE ON 1/4″ SHAFT – GRINDER – BUFFER OR MOTOR LEFT HAND THREAD – 3-5/8″ LONG Tapered Threaded Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used. This Arbor – Spindle is used to hold Wheels with 1/8″ Pin Hole Centers: Polishing Buffs and Felt Wheels, Satin Finish wheels, Wood Hub Brushes… NOTE: DO NOT USE Tapered Spindles to hold Grinding Stone Wheels or Hard Heavy Wheel – IT IS EXTREAMLY DANGEROUS TO DO SO! Spindle has a 1/4″ arbor hole to work on 1/4″ shaft Grinders, Motors or Polishers. The arbor is made and threaded to be used on the LEFT Side of the motor. Spindle has a pair of Allen Head Set Screws to attach to your motor shaft. Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight. FEATURES: · Precision Quality · Machining is done by CNC Equipment · Made of Steel and Anodized Finish · Allen Set Screws do not protrude above the main shaft of the spindle. SPECIFICATIONS: JETS Product # 1603-291414 – Material: Cold Rolled Steel – Overall Length: 3-5/8″ – 92mm- Arbor Body Diameter: 5/8″ – 15.9mm – Spindle Body Length: 2-1/4″ – 57.2mm – Spindle Shaft Depth: 55/64″ – 21.75mm – Arbor Hole: 1/4″ – 6.3mm for Shaft Connection – Weight: 2.3oz. – 66grm Spindle is made to be used on a 1/4″ shaft diameter and on the LEFT Hand Side of Motor with forward direction. NOTE: DO NOT USE Tapered Spindles to hold Grinding Stone Wheels or Hard Heavy Wheel – IT IS EXTREAMLY DANGEROUS TO DO SO! SHIPPING: Via USPS FIRST CLASS MAIL NOTE: Visit JETS INC. ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more Jewelers Equipment Tools and Supplies. JETSINC. 0620 E3 CKSP Z M